Tube Mold
פורסם: 06 אפריל 2021, 07:54Product Details
Product NamePE plastic mold
Mold selectionDIN1.2738 die steel
Glue feeding methodHot runner multi-point injection
Ejection systemCylinder ejection, bullet ejection, air ejection
Cooling systemMulti-point cross short circulation system
Mold cycle (from blanking to trial mold)65-75 working days (except for special circumstances)
Polyethylene (PE for short)
Polyethylene is a thermoplastic resin made by polymerization of ethylene. In industry, it also includes copolymers of ethylene and a small amount of 伪-olefin. Polyethylene is odorless, non-toxic, feels like wax, has excellent low temperature resistance (the minimum use temperature can reach -100~-70掳C), has good chemical stability, and can withstand most acid and alkali corrosion (not resistant to oxidation Nature acid). It is insoluble in general solvents at room temperature, has low water absorption and excellent electrical insulation.
Ordering steps
1锛塗he customer provides 3D drawings and sufficient mold and plastic shell mold information
2锛塛e will provide a quotation for plastic shell mold and injection molding (plastic cover) within half a day
3锛塁ustomers consider our offer
4锛塁ustomer places an order
5锛堿fter confirming the detailed and detailed information with the customer, we can design and manufacture the plastic mold within the delivery time
6锛塗rial samples of plastic molds sent to customers to confirm whether there are any modifications before mass production
7锛堿rrange mass production immediately and complete production before the lead time
8锛塒unctual sea or air freight
Company information
TPV Mold Technical Service
1锛塐rder the following
Please submit your order/contact number for reference by TPV processing department. We will send you a progress report or photos within 12 hours.
2锛塒rototype
We provide customer service for prototyping and prototype development. Usually, a simple prototype development takes 7 working days. This will help our customers in the new product development stage and save them costs in new projects. For more information, please contact our sales department. Via email or phone.
3锛塒roduct design and. New Idea Development
TPV has 4 design engineers responsible for product design and design improvement. It can help hundreds of customers develop new products. TPV Mould Technology provides engineering &. Provide technical training for our customers.
4锛塚edio of TPV Project Department
We stock all your mold running videos for one year. We can send you a video to check the mold operation or to study the mold operation before shipping the mold. It saves you time and helps you to move personnel.
5锛塖pare parts.
TPV provides customers with timely spare parts after-sales service. We protect all spare parts drawings for customers and provide a large number of spare parts as quoted. For standard accessories, you can refer to our list or buy in your market.
FAQ
Q: How long is the mold production cycle?
A: The total cycle of mold from blanking to mold trial is 40-65 working days (except for special circumstances), and each link is kept on file so that customers can understand the progress of the mold at any time.Tube Mold
website:http://www.guanjie-mould.com/plastic-mould/tube-mold/
Product NamePE plastic mold
Mold selectionDIN1.2738 die steel
Glue feeding methodHot runner multi-point injection
Ejection systemCylinder ejection, bullet ejection, air ejection
Cooling systemMulti-point cross short circulation system
Mold cycle (from blanking to trial mold)65-75 working days (except for special circumstances)
Polyethylene (PE for short)
Polyethylene is a thermoplastic resin made by polymerization of ethylene. In industry, it also includes copolymers of ethylene and a small amount of 伪-olefin. Polyethylene is odorless, non-toxic, feels like wax, has excellent low temperature resistance (the minimum use temperature can reach -100~-70掳C), has good chemical stability, and can withstand most acid and alkali corrosion (not resistant to oxidation Nature acid). It is insoluble in general solvents at room temperature, has low water absorption and excellent electrical insulation.
Ordering steps
1锛塗he customer provides 3D drawings and sufficient mold and plastic shell mold information
2锛塛e will provide a quotation for plastic shell mold and injection molding (plastic cover) within half a day
3锛塁ustomers consider our offer
4锛塁ustomer places an order
5锛堿fter confirming the detailed and detailed information with the customer, we can design and manufacture the plastic mold within the delivery time
6锛塗rial samples of plastic molds sent to customers to confirm whether there are any modifications before mass production
7锛堿rrange mass production immediately and complete production before the lead time
8锛塒unctual sea or air freight
Company information
TPV Mold Technical Service
1锛塐rder the following
Please submit your order/contact number for reference by TPV processing department. We will send you a progress report or photos within 12 hours.
2锛塒rototype
We provide customer service for prototyping and prototype development. Usually, a simple prototype development takes 7 working days. This will help our customers in the new product development stage and save them costs in new projects. For more information, please contact our sales department. Via email or phone.
3锛塒roduct design and. New Idea Development
TPV has 4 design engineers responsible for product design and design improvement. It can help hundreds of customers develop new products. TPV Mould Technology provides engineering &. Provide technical training for our customers.
4锛塚edio of TPV Project Department
We stock all your mold running videos for one year. We can send you a video to check the mold operation or to study the mold operation before shipping the mold. It saves you time and helps you to move personnel.
5锛塖pare parts.
TPV provides customers with timely spare parts after-sales service. We protect all spare parts drawings for customers and provide a large number of spare parts as quoted. For standard accessories, you can refer to our list or buy in your market.
FAQ
Q: How long is the mold production cycle?
A: The total cycle of mold from blanking to mold trial is 40-65 working days (except for special circumstances), and each link is kept on file so that customers can understand the progress of the mold at any time.Tube Mold
website:http://www.guanjie-mould.com/plastic-mould/tube-mold/